background image

5

4

2-2. Connecting the Cables

You can connect up the cables required for printing to the printer. 
They all connect to the connector panel on the back of the printer, which is shown below :

Before connecting any of the cables, make sure that both the printer and the computer are turned off.

2-1. Unpacking

Your printer box should include these items. If any items are damaged or missing, please contact your 
dealer for assistance.

                                                                                    

 

               

The Printer   

                    CD 

 

           Roll Paper

      

     

 

           

             

Interface Cable(optional)                                                        Adaptor(Optional) 

  

2. Setting Up the Printer

For connection to a
host computer.

For connection to a
host computer.

For connection of
the AC adapter.
Never unplug the
AC adapter while 
the printer is on.

Connects to peripheral units
such as cash drawers, etc.
Do not connect this to
a telephone.

INTERFACE CONNECTOR

INTERFACE CONNECTOR(USB)

PERIPHERAL DRIVE CONNECTOR

POWER CONNECTOR

POW

ER

ERR

OR

PAP

ER

FEED

Summary of Contents for SLK-TE32 Series














Reviews: