SEWOO LK-T12, User Manual

Page: 18 / 28

17
♣
Important!
When connecting or disconnecting the power supply from the printer, be sure that the following
cautions are observed.
Use a power supply (Limited Power Supply) of DC 24V±10% and more than 2.5A.
Be careful about installing the printer in an area where there is electrical noise.
Take the appropriate measure to protect against electrostatic AC line noise, etc.
6-1. General Specifications
(1) Printing Method Direct line thermal printing.
(2) Print speed 160mm/sec
(3) Dot density (Hor / Ver) 180 DPI X 180 DPI
(4) Dot Pitch 0.141mm X 0.141mm
(5) Printing Width Max 72mm (512 dots)
(6) Number of print columns.
Font “A” Font “B”
42 columns 56 columns
(7) Roll paper
Refer to chapter 2 for details on the recommended roll Paper.
Paper width : Default 79.5 ±0.5mm
(Min. : 38mm ~ Max. : 82.5mm)
Roll diameter : Max. ø83.0mm
(8) Weight 1.7 Kg
6. Specifications