11
3 Print menu
Language
Media
Printer
Exit
Left Margin
Top Margin
TOF Position
Density
Label Length
Backfeed Setting
Cover Setting
Printing Speed
Overwrite
Power save
Password Protect
Password
Factory Reset
Auto Detection
OSD
Description
Left Margin
Sets the left margin value (-127 to +127 dots).
Top Margin
Sets the top margin value (-127 to +127 dot).
TOF Position
Sets the TOF position (-127 to +127 dot).
Density
Sets the print density (-127 to +127).
Label Length
Sets the label length (10 to 6000 mm).
Backfeed Setting
Enable/disable automatic back feed of media before printing
Cover Setting
Sets the function upon closing the cover.
-
Automatic alignment / Reprint / None
Printing Speed
Sets the max print speed. (0 to 10 Level)
Overwrite
Sets what happens when the print line exceeds the print width.
-
Wrap print line or discard/truncate the remaining data.
Power save
Set power management mode.
-
Power Save Enabled/ Power Off / None
Password Protect
Enable/Disable password protection LCD "Setting" menu.
Password
Change the password to use when entering the "Setting" menu.
Factory Reset
Perform factory reset function
Auto Detection
Set whether to enable or disable the automatic paper detection
function at boot time .
※ For the password setting method, refer to the pin code on page 38.
4. Menu OSD Configuration and Description
