SEW MOVIFIT FDC, Operating Instructions Manual, Page: 30 / 140

30
Operating Instructions – MOVIFIT® FDC
4
Central opening/closing mechanism
Mechanical Installation
4.4.2 Closing
A socket wrench (SW8) is required for the central retaining screw.
1. NOTICE An improperly seated gasked in the EBOX creates a strong counterforce
when closing the MOVIFIT
®
unit.
The central opening/closing mechanism may be damaged as a result.
• Make sure that the gasked is properly seated in the groove of the EBOX.
This means that
– the gasket is inserted into the groove over the entire circumference
– and does not protrude from the groove.
2. Position the EBOX on the ABOX.
– Do not twist the EBOX in the process.
– Hold the EBOX only on the sides during the process (see following picture).
3041013771
90°