7
Startup
Starting up MOVI-SWITCH-1E
Operating Instructions – Explosion-Protected MOVI-SWITCH
®
Drives
36
7.3
Startup of MOVI-SWITCH
®
1E
Starting up
MOVI-
SWITCH-1E
7.3.1
Starting the drive
1. Check the connection of the MOVI-SWITCH
®
drive.
See chapter "Electrical installation".
2. Switch on the line voltage.
3. Switch on the MOVI-SWITCH
®
drive with the control signal "RUN" = "1".
7.3.2
Description of the control signals
The following table shows the digital input and output signals for controlling the MOVI-
SWITCH
®
drive:
Description of the control signals
Terminal
Function
24 V
DC 24 V supply voltage
RUN
Control signal DC 24 V
0: Stop drive
1: Start drive
'
Reference potential 0V24
OK
Ready signal, DC 24 V
0: Overtemperature or no DC 24 V supply
1: DC 24 V supply is connected and no overtemperature is present
7.3.3
Function check of the brake
In this chapter, observe the information in the operating instructions "Explosion-Pro-
tected AC Motors EDR..71 – 315, EDRN63 – 315".
25988670/EN – 04/2020
