2
Device structure
GBG10..A keypad
Addendum to the Operating Instructions – GBG10..A..
8
2.1.1
Functions of the GBG10..A keypad
The GBG10..A keypad has the following functions:
•
Changeover between automatic mode (bus control) and local mode
•
Enable CW
•
Enable CCW
•
Stop (no enable)
•
Changeover between speed setpoint f1/f2
•
Reset of drive faults
•
Brake release or DynaStop
®
deactivation without drive enable
2.1.2
Requirements
For connecting the keypad to the drive unit, the drive unit must be equipped with the
following plug connector:
•
X5131 (SNI or DSC designs)
•
X5132 (DAC designs)
To operate the drive unit in local mode with a controller of SEW‑EURODRIVE (e. g.
MOVIFIT
®
FDC), the following application software must be installed on the controller:
•
ApplicationConfigurator
(CCU) from version 170.100
or
•
MultiMotion
(freely programmable) from version.170.100
2.1.3
Design
The GBG10..A keypad is available in the following designs:
Device
Type designation
Part number
Keypad with connection cable (1 m)
GBG10-11A-00
13575848
23569654/EN – 07/2017
