INFLATABLE BOA
TS
®
®
INFLATION INSTRUCTIONS
CAUTION!
Do not over inflate. Pressurize product to "Inflation Pressure"
stated in the chart for your specific product.
WARNING!
Never use a compressor, CO
2
or compressed air to inflate the
product. Do not let Your product come into contact with sharp,
pointed objects.
To inflate using any Sevylor
®
Pump:
3
1
2
3
4
1. To begin inflation, open external cap and pull firmly on
the lanyard to extend out. This will open internal yellow
seal.
3.
When fully inflated, seal valve by pushing in with
adapter nozzle. This will seal the internal yellow
stopper and keep air from escaping while closing cap.
Gently twist adapter while backing hose out of valve.
2. Attach nozzle of hose to inflation end of pump. Insert
adapter nozzle into valve and start pumping.
4. Fully remove pump and hose and close external cap.
Valve should appear depressed into itself.
