WARNING
• Maximum Tow Capacity….. 300 lbs.
• Maximum Tow Speed…….. 20 MPH.
• Use a tow rope with a minimum of 4100 lbs. tensile strength.
• Check your vehicle’s owner’s manual for maximum load capacity.
Repairs
Assess the damaged or the area to be repaired, clean the damaged area and the patching
material with a grease remover of the alcohol type, please note that in order for the repair to be
successful, the humidity level should be less than 60%, temperature between 65° F / 77° F or
18°C / 25° C. Avoid carrying out repairs in the rain or in direct sunlight. Check that the tube is fully
deflated and lies flat.
Draw the shape of the patch exactly where it will be applied, cut a round patch at least 2” / 5 cm
larger than the cut/damaged area, clean the damaged area and the corresponding side of the
patch.
Apply 3 thin layers of glue on both the patch and the damaged area, allow for it to dry for 5
minutes between layers until the glue feels tacky. When the third layer of glue is dry, apply the
patch without pressing and adjust the positioning if required, press the air bubbles which may have
formed under the patch by smoothing the patch with a round object such as a spoon, do this
procedure by starting in the center of the patch towards the outside, clean the excess glue with a
solvent.
WARNING
•
Perform all of your repairs in a well ventilated area.
•
Avoid inhaling glue vapors or swallowing.
•
Avoid contact with the skin or the eyes.
•
Keep all repair materials (glue, solvents, etc.) away
from children’s reach.
Storage
To clean your “Aqua Trailer”, use a mild soapy solution. Be sure to give it a chance to dry before
you store it for an extended period of time.
Thank you for choosing Sevylor. We hope you enjoy your “Aqua Trailer” for many years.
0105
