Step 12: Place Power Strip (#46).
UltraHD Wood Top
Restore Shallow Scratches or Chips
Applying a Polyurethane Coating
Please follow the manufacturer's instruction on the product for application.
Stainless Steel Maintenance:
These parts have an UltraGuard® fingerprint resistant finish. Do not use traditional stainless steel cleaners on this unit. Lightly
wipe off once a month with clean warm water and a soft cloth (preferably a micro fiber cloth). This is the safest formula to
prevent new stains from appearing over time and manage unwanted fingerprints or grease marks.
Remember to always wipe in the direction of the surface grain (NEVER ACROSS) and always use a lint-free cloth.
Once the surface is clean, thoroughly wipe dry with a soft absorbent cloth.
ASSEMBLY INSTRUCTIONS
(pg 6 of 7)
On the front of the FPR-SS Bottom
Pegboard Panel (#3-D) insert 2 pcs of Stud
Screw J (#51). Then, hook the Power Strip
(#46) onto the screws. Insert the power
cord through the Rubber Grommet in the
bottom corner of Pegboard Panel (#3-D).
NOTE: You can position Power Strip (#46)
on the left or right side of the FPR-SS
Bottom Pegboard Panel (#3-D).
Place Hooks (#100), (#101), (#102),
(#103), #104), (#105), (#106), (#107) to
Pegboard as needed.
Although great care is taken to hand select consistent wood top color and grain for UltraHD products,
there can and will be natural variations in color and graining between finished products. These
variations contribute to the beauty of using a natural material as a workbench and are considered
standard quality. Variations of color within these standards and minor scratches in the clear coat finish
will not be a reason for replacement. If the wood top is received with excessive damage or splitting,
Seville Classics will guarantee replacement of the wood top.
If the wood top becomes scratched and chipped over time or during assembly, a Polyurethane finish
can be applied to help restore the wood's natural texture, as well as protect the surface from future
damage.
UltraHD Stainless Steel Pegboard Workcenter (Model No. 20267)
[!] CAUTION:
Potential Shock or Fire Hazard. This unit is not
intended for use in wet or potentially wet locations, such as
showers, saunas, under or near fishtanks, sinks, etc.
