SEVERIN KM 3920 MR. Twister, Instructions For Use Manual

Page: 5 / 6

11
∙ Check the appliance and blade inserts
for damage before every use. Do not
operate if the appliance or a blade
insert shows any sign of damage.
∙ In the event that you detect damage,
please contact our customer service
department by phone or email (see
appendix).
∙ Repairs to this appliance or its power
cord must only be carried out by our
customer service.
Overview and parts included
1. Pestle (also holds food in position)
2. Feeder tube
3. Blade insert - ‘Spaghetti’
4. Blade insert - ‘Tagliatelle’
5. Gear-wheel insert
6. On/Off switch
7. Cleaning brush
8. Power cord with plug
9. Container
10. Housing
11. Feeder tube with pestle
Short-time operation
The appliance is designed for short-term operation only,
i.e. it should not be operated continuously for more than 10
minutes. Allow it to cool down for another 30 minutes, after
which it may be used again.
Blade inserts
This appliance comes with two different blade inserts:
‘
Spaghetti’ for narrow spirals
‘Tagliatelle’ for wider spirals
To achieve optimum results, we recommend replacing the
blade inserts as soon as they start producing uneven or
unsightly spirals.
Operation
∙ Clean the vegetables and cut into pieces of max. 15 cm
length.
∙ Place the container under the feeder chute.
∙ Fit the gear-wheel insert into the housing.
∙ Select the desired blade insert and fi t it into the gear-
wheel insert.
∙ Fit the feeder chute and turn clockwise until it is heard
locking into place ( ).
∙ Take a prepared food item and attach it to the end of the
pestle.
∙ Insert the pestle with the food into the feeder chute and
hold it in position.
∙ Caution: Ensure that the food item does not protrude
from the chute.
∙ Turn the appliance on.
∙ Guide the pestle slowly downwards, without applying
fi rm pressure. The processed food is collected inside the
container.
∙ Hint: Should a piece of food become separated
from the pestle, switch the appliance off and
disconnect it from the mains. Then take off the
feeder chute, remove the detached food and re-
attach it to the pestle.
∙ Take out the pestle and attach a new piece of food, if
desired.
∙ For technical reasons, a small piece if food will remain
on the pestle. Remove this and use it another time.
∙ Switch the appliance off and disconnect it from the
mains.
After use
∙ The appliance should be thoroughly cleaned after each
use (see Cleaning and care) .
∙ Empty the container.
∙ Take out the pestle.
∙ Remove the feeder chute by turning anti-clockwise ( ).
∙ Remove the blade and gear-wheel inserts.
Cleaning and care
∙ Always disconnect the appliance from the mains before
cleaning.
∙ Do not use abrasives, harsh cleaning solutions or hard
brushes for cleaning.
∙ To avoid the risk of electric shock, do not clean the
housing with water and do not immerse it in water.
∙ The housing may be wiped with a slightly damp, lint-free
cloth.
∙ All detachable parts (see After use ) may be cleaned
using hot water and a mild detergent.
∙ Caution: The blades are very sharp. Always use the
cleaning brush provided.
∙ The pestle, feeder chute, gear-wheel insert and container
can also be cleaned in a dishwasher. However, the blade
inserts are not dishwasher-safe.
Disposal
Devices marked with this symbol must be
disposed of separately from your household
waste, as they contain valuable materials which