SEVERIN KA4813, Operating Instructions Manual

Page: 28 / 200

28
GB
3. Set the grind regulator
12
to the required grind.
•
Turn the regulator clockwise towards “–” to grind the coffee finer.
• Turn the regulator anticlockwise towards “+” to grind the coffee
coarser.
5.2
With ground coffee
1. Press the “OPEN” button
11
on the side of the appliance to open the
swing-out filter
4
.
2.
Place the filter insert
3
in the swing-out filter
4
.
3.
Place a disposable coffee filter in the filter insert
3
.
TIP
You can also use the permanent filter
2
instead of
a disposable coffee filter.
4.
Add the ground coffee to the disposable coffee filter. Use the supplied
measuring scoop
6
for this purpose. Refer to the following table for
the required amount:
Number
of cups
Number of scoops
2 1½ – 2
4 3 – 4
6 4½ – 6
8 6 – 8
10 8 – 10
5.
Fit the filter ring
1
onto the filter insert
3
.
6.
Close the swing-out filter
4
.
7. Remove the coffee jug.
TIP
Fill the coffee jug only up to the required number of
cups as all the water is used for brewing. One cup is
approx. 125 ml.
8. Fill the coffee jug
5
up to the mark for the required number of cups.
9. Open the water tank
13
.
10. Pour the water into the water tank
13
. Check the water level at the level
indicator
9
.
11. Close the water tank
13
.
12. Place the coffee jug
5
on the hotplate
7
.
13. Plug the power plug
8
into the socket. Press the “ ” button.
Â
The appliance switches on automatically. The time and the current
settings are shown on the display.
14. Press the “ ” button to switch off the grinder.
Â
The “ ” button turns blue.
15. Press the “ ” button.
Â
The “ ” button lights up. The appliance begins to brew the coffee
and the “ ” symbol appears on the display.
16. Wait until the appliance beeps 3 times and the “ ” symbol goes out.
Â
The coffee is ready.
TIP
Unless you press the “ ” button after the
coffee is made, the coffee will be kept warm for
the period defined in ►“ Set switch-off time” on
page 25.