SEVERIN ES 3569, Instructions For Use Manual

Page: 26 / 196

26
GB
4 Cleaning the juicer
Clean the appliance before it is used for the fi rst time,
and also immediately after each cycle of use.
WARNING
Risk of injury and damage to the
appliance.
– Never immerse the motor unit in
water.
WARNING
Health risks due to unsuitable cleaning
agents.
– Only food-grade cleaning agents
should be used for cleaning the
individual components.
CAUTION
Do not use abrasives, harsh cleaning
solutions or tools that night cause
scratches to the surfaces. The individual
components of the juicer are not
dishwasher-safe.
1. Clean the motor unit with a damp cloth.
2. The micro sieve and the attachment for frozen
ingredients should be cleaned thoroughly under
running water, inside and out, with the help of the
cleaning brush bristles.
3. Clean the spiral juice extractor under running water.
If necessary, you can use the pointed end of the
cleaning brush to remove stubborn pulp residue
from the spiral juice extractor.
4. Clean the scraper under running water.
5. Remove any pulp residue from the bowl and then
clean it under running water.
6. The lid and pestle must be cleaned thoroughly
under running water.
7. The pulp and juice containers may be cleaned with
a little mild detergent and clean water.
5 Assembling the juicer
1. Place the motor unit on a fi rm, level surface,
ensuring that is fi rmly seated.
HINT:
The On/Off switch should face to
the right.
2. Place the processing bowl onto the motor unit in
such a way that the left mark on the bowl is properly
aligned against the corresponding arrow symbol on
the motor unit.
3. Put the micro sieve into the scraper.
4. Put the scraper with the micro sieve into the bowl in
such a way that the two arrows are aligned.