16
Steam cleaning
3
Steam cleaning
Assembly of appliance
illustrated Quick Start Guide
(Page 2).
Filling water tank
1. Make sure that the appliance is switched off and the plug is pulled out.
2.
Fill supplied filling flask with cold tap water.
Never put additives in water tank!
3.
Open cap on water tank and empty filling flask into wa-
ter tank as shown.
4.
In doing so, do not overfill water tank. Always observe
fill level.
5.
Close cap on water tank.
illustrated Quick Start Guide
(Page 2).
Steam cleaning
1. Make sure that surface is suitable for hot steam claning.
If in doubt, contact manufacturer of surface to be cleaned.
TIP:
It could also be useful to sweep or vacuum surface first.
2.
Place cable into loop on handle to avoid running over it when cleaning.
3.
Put clean cleaning cloth underneath and place mop
head on it.
4.
Insert plug into outlet. The LED blinks.
5.
Switch the appliance on as shown. The LED is lit.
6.
Move the appliance like a regular mop.
As soon as the appliance is moved, steam is produced.
7.
Clean floor with hot steam. While doing so, do not re-
main in one spot for any period of time.
illustrated Quick Start Guide
(Page 3).
ST 7182.book Seite 16 Dienstag, 22. Juli 2014 8:33 08
Summary of Contents for 7182
Page 2: ...2 ...
