SEVERIN 4814000, Manual, Page: 26 / 200

26
GB
1. Press the “ ” button for 2 seconds. You will see “ ” and “ ”
flashing on the display.
2. Press the “ ” button.
→
: Blooming function switched on
→
: Blooming function switched off
→ Wait a few seconds. The most recent option displayed will be
applied.
TIP
The display switches off 5 minutes after making cof-
fee or, if coffee is not made, 1 minute after the last
entry. To switch it on again, press the “ ” button.
TIP
You can interrupt the brewing function at any time
by pressing the “ ” button. Water remains in the
water tank when you interrupt the brewing function.
Empty the water tank by removing the disposable
coffee filter or permanent filter from the filter insert,
placing the empty vacuum jug into the device and
continuing operation after pressing the “
” button
followed by the “ ”.
5.1
With coffee beans
CAUTION!
Make sure that the water tank is closed when filling
the bean container to prevent the obstruction of the
water system with coffee beans.
1. Remove the bean container lid.
CAUTION!
Do not use unroasted, caramelised or sugar-coated
coffee beans.
2. Add no more than 200 g of coffee beans to the bean container.
3.
Replace and firmly press down the lid.
4. Press the “OPEN” button on the side of the appliance to open the swing-
out filter.
5.
Place the filter insert in the swing-out filter.
6.
Place a disposable coffee filter in the filter insert.
TIP
You can also use the permanent filter instead of a
disposable coffee filter.
7.
Fit the filter ring onto the filter insert.
8.
Close the swing-out filter.
9. Remove the vacuum jug.
TIP
Fill the vacuum jug only up to the required number
of cups as all the water is used for brewing. One cup
is approx. 125 ml.
10. Fill the vacuum jug with cold tap water up to the required number of cups.
11. Open the water tank.
12. Pour the water into the water tank until it reaches the desired amount of
cups.
13. Empty out residual water inside the vacuum jug.
14. Place the vacuum jug with lid into the device.