910065 de-en-fr-nl ma 2018
22/44
A-7
soup
200 ml
200
400 ml
400
600 ml
600
A-8
cakes
475 g
475
A-9
pizza
200 g
200
300 g
300
400 g
400
A-10
chicken / poultry
500 g
500
750 g
750
1000 g
1000
1200 g
1200
Setting multiple programmes
The unit may be set for a maximum of 2 programmes running consecutively, e.g. defrosting, followed by microwave cooking. Any
defrosting, microwave, grill or hot-air programmes as well as the combination of the programmes may be selected. Any defrosting
programme must of course run before any cooking programme can be started.
Example: to defrost food before it is cooked using the microwave function.
1. Programme the defrost function (without pressing )
2. Programme the microwave function.
3. Pre ss
. The display shows the appropriate symbols for the selected programmes.
5 beeps indicate that the entire programme has
nished.
Hint: This memory function is especially helpful when using the microwave to cook food at different power settings. While a higher
power setting is selected initially, the power can be reduced at a later stage in order to keep the food hot, and to ensure that
the heat is evenly distributed when the food is already done.
Timer
The microwave can be pre-programmed in such a way that it starts operating at a pre-determined time. However, always check
rst
that the time on the unit has been correctly set prior to using the timer delay function.
1. Set the time (see Setting the clock).
2. Set the desired programme. The unit allows you to set 2 programmes; however, none of the defrosting programmes can be
selected with the timer delay.
Note: Do not yet press after the current programme selection. Automatic cooking programmes can only be started individually.
3.
Press
. The current time is displayed and the hour display
ashes.
4. Use the rotary control to select the desired hour setting (between 0-23 resp. 1-12) at which you want the unit to start operating.
5.
Press . The minute display
ashes.
6. Use the rotary control to select the desired minute setting (between 0-59) at which you want the unit to start operating.
7.
Press
. The selected programme will start at the pre-programmed time, when 2 acoustic signals will be heard.
Childproof safety device:
This safety device prevents children from operating the appliance without supervision.
To activate the safety device, press
for 3 seconds. The symbol
appears on the display.
To switch off the safety device, press
again for 3 seconds. The symbol
disappears.
Note: Should you experience a problem switching the appliance on,
rst verify that the safety device is not activated.
