12
Installation Instructions
1) Prepare for Installation
•
Séura recommends preparing a soft, horizontal surface (such as a table with a blanket) within close proximity to the installation location
so the TV may be positioned flat while cable connections are made.
•
Have all tools related to installing the wall mount (not included) prepared and ready for use.
•
Ensure that power outlet and content source have been adequately installed and appropriate for the outdoor location.
2) Install Wall Mount (sold separately)
•
Install the wall mount according the the manufacturer's instructions, ensuring that the weight of the TV is within the specified weight of
the wall mount.
•
Make all necessary power and content cable connections and verify that the remote or control system functions correctly.
•
Do not cover more than 1/3 of the hot air outlet with bracketry on the back of the TV.
3) Hang TV
•
Hang the TV according to the wall mount manufacturer's instructions.
•
Place a loop in the slack of the cable and secure with a zip tie or cable strap to ensure water drips freely away from the TV or wall outlet.
•
Verify all content feeds and use of remote and/or control system.
Drip Management
DON'T
install the TV above the power
source without slack in the cables.
Water may drip from the cable into the
power outlet.
DON'T
install the TV without slack in
the cables. Water may drip from the
cable into TV and cause damage.
Water
Collects
Water
Drips
Freely
Water
Collects
DO
install the TV with a drip
management loop in the cables. Water
is free to drip down the loop and away
from the electronics.
