17
3-9
Connecting RS-232C PC Control
COMManD TaBLE
COMManDS nOT InDICaTED HERE aRE nOT gUaRanTEED TO OPERaTE
COnTrOL ITEM
COMManD ParaMETEr
COnTrOL COnTEnTs
POWER On COMManD SETTIng
R S P W 0 _ _ _
OFF
THE POWER On COMManD REJECTED
1 _ _ _
On
THE POWER On COMManD aCCEPTED
POWER SETTIng
P O W R 0 _ _ _
POWER OFF
IT SHIFTS TO STanDBY
1 _ _ _
POWER On
POWER On
InPUT SELECTIOn TOggLE
I T g D X _ _ _
(TOggLE)
IT InPUT- SWITCHES BY THE TOggLE. (IT IS THE SaME aS an InPUT CHangE KEY)
TV
I T V D 0 _ _ _
IT InPUT- SWITCHES TO TV. (a CHannEL REMaInS aS IT IS. (LaST MEMORY))
InPUT 1-5
I a V D * _ _ _
InPUT TERMInaL nUMBER
IT InPUT- SWITCHES TO InPUT 1-InPUT 5. (1 aV) (2 S-V) (3 COMP) (4 Vga) (5 HDMI)
VOLUME
V O L M * * _ _
VOLUME 0-99
VIEW MODE
W I D E * _ _ _
1: S.STRETCH [aV]
aLTHOUgH IT Can CHOOSE nOW, IT IS TOggLE OPERaTIOn In InSIDE.
2: SIDE BaR [aV],
OnLY aVaILaBLE WHEn 4:3 SIgnaL IS BEIng InPUT.
3: ZOOM [aV],
OnLY aVaILaBLE WHEn 4:3 SIgnaL IS BEIng InPUT.
4: STRETCH [aV]
OnLY aVaILaBLE WHEn 4:3 SIgnaL IS BEIng InPUT.
5: nORMaL [PC]
6: ZOOM[PC]
7: STRETCH[PC]
8: DOT BY DOT[PC][aV]
9: FULL SCREEn [aV]
[aV] OnLY aVaILaBLE WHEn 1080i/p IS BEIng InPUT.
MUTE
M U T E * _ _ _
1: On, 2: OFF
SLEEP TIMER
O F T M * _ _ _
0: OFF, 1: OFF TIMER-30 MIn.,
2: OFF TIMER-60 MIn.,
3: OFF TIMER-90 MIn.,
4: OFF TIMER-120 MIn.
CHannEL
DIRECT
D a 2 P * * * *
(0100-9999) (EX: 50.2=50 02)
DIgITaL aIR (TWO-PaRT nUMBERS, 3-DIgIT PLUS 2-DIgIT)
D C 2 U * * * _
(1-999) (EX: 50.2=050 002)
DIgITaL CaBLE (TWO -PaRT nUMBERS, 3-DIgIT PLUS 3 DIgIT)
CHannEL UP
C H U P X _ _ _
THE CHannEL nUMBER OF TV +(X)
IF IT IS nOT TV DISPLaY, IT WILL InPUT-SWITCH TO TV. (SaME FUnCTIOn aS CH
5
)
CHannEL DOWn C H D W X _ _ _
THE CHannEL nUMBER OF TV -(X)
IF IT IS nOT TV DISPLaY, IT WILL InPUT-SWITCH TO TV. (SaME FUnCTIOn aS CH
6
)
nOTE:
UnDERSCORES (_) WITHIn THE PaRaMETER COLUMn REPRESEnT a SIngLE SPaCE (hex 20)
aSTERISKS(*) WITHIn THE PaRaMETER COLUMn REPRESEnT a VaLUE WITHIn THE RangE InDICaTED In THE COnTROL COnTEnTS
X WITHIn THE PaRaMETER COLUMn REPRESEnTS a VaLUE WITHIn THE RangE InDICaTED In THE COnTROL COnTEnTS
* aLL COMManDS MUST EnD WITH a LInE FEED (hex Oa)
attach RS-232C cable cross-type to the supplied Din/D-Sub RS-232C.
Set the RS-232C communication settings on the PC to match the
communication conditions listed.
Model: 19.3
Baud rate:
9600 bps
Data length:
8 bits
Parity bit:
none
Stop bit:
1 bit
Flow control
none
Model: 19.3 aLT / Hydra / 10.3
Baud rate:
115200 bps
Data length:
8 bits
Parity bit:
none
Stop bit:
1 bit
Flow control
none
COMMUnICaTIOn COnDITIOnS
Send the control commands from the PC via the RS-232C connector.
1. The LCD operates according to the received command and sends
a response message to the PC. Do not send multiple commands at
the same time.
2. Wait until the PC receives the confirmation response before sending
the next command.
Antenna Outlet
Séura TV Mirror (back view)
Video Source
Video
Audio
RF Coaxial Antenna
Power Outlet
Séura TV Mirror
(back view)
L
R
Séura TV Mirror (back view)
High Definition
Video Source
HDMI
Séura TV Mirror (back view)
Component
Video Source
Séura TV Mirror (back view)
Audio
L
Y
Pb
Pr
R
External
Speakers
Séura TV Mirror (back view)
PC Source
Séura TV Mirror (back view)
15-Pin VGA
PC Audio
Output
(green)
PC Audio In
(blue)
PC Source
Séura TV Mirror (back view)
