Seuic UTouch, Reference Manual

Page: 55 / 77

52
Figure 8-11 Application Settings
(1) Power-on self-starting: When it is enabled, the UHF program will be enabled
automatically when the device is powered on;
(2) Card searching sound: When it is enabled, there will be voice prompt when the device is
searching the card;
(3) Card searching vibration: When it is enabled, there will be vibration prompt when the
device is searching the card;
(4) Continuous card searching: When it is enabled, and the [Lift to stop] switch is on: press
Scan button, hold it, and the device will continue to search for the card, and after
releasing the button, the card searching will end; when the [Lift to stop] is disabled, just
press Scan button once, and the card searching will continue even after the button is
released. In the continuous card searching state, press Scan button again, then release it
and the card searching will stop;
(5) Spacecharacter: When it is enabled, the space character selected here will be inserted
between every two pieces of card searching data;