46
automatically after finishing scanning barcodes;
(5) Power-on self-starting: When it is enabled,the scanning program will be
enabledautomatically when the machine is powered on;
(6) Display barcode type: When it is enabled, the barcode type will be displayed
when scanning barcodes;
(7) Lift to stop scanning: When it is enabled, lift the scan button and the scanning
light will go out immediately; when it is disabled, lift the scan button and the scanning
light will go out after [Scanning duration];
(8) Cycle scanning: When it is enabled, scanning will be carried out
automatically and continuously;
(9) Interval time: Set the time by yourself;it is the interval time between the
completion of barcode scanning and the scanning of next barcode;
(10) Restore default barcode settings: You can restore the default barcode
settings, as shown in Figure 8-5;
(11) Barcode suffix: You can add barcode output suffix (it can be numbers,
letters, special characters, etc.);
(12) Barcode prefix: You can add barcode output prefix (it can be numbers,
letters, special characters, etc.);
(13) Ending character: You can select the barcode ending output character,
including Enter, Tab, Space, None;
(14) Bar code sending mode: You can choose to send by focus input,
broadcasting, simulation keyboard or clipboard (input method supporting hardware
keyboard shall be selected for simulation keyboard), as shown in Figure 8-6;
(15) Developer option: Enter the password 888888 to modify the developer
option (it is not recommended to change it at will), as shown in Figure 8-7.
Summary of Contents for UTouch
Page 46: ...43 Figure 7 38 Model Hardware ...
Page 50: ...47 ...
