79
and Aimer are on by defaultwhile scanning. Choose Aimer and then green
aiming light is on while scanning. Choose Backlightand then red
backlight is on while scanning. ChooseNo Light and then neither red
backlight nor green aiming light is on (Not Recommended).
Flash LEDs: You can set whether the horizontal green aiming light
flashes while scanning. The flashing function of the application is on by
default.The Flash LEDs option will be ticked on the left.
Enable Centering: When the Centering mode is enabled, the barcode
detection range of the Scanner while scanning will be limited. When
many bar codes are concentrated together with small space among their
positions. The barcode, within the scan range but not in the center, will
the first to be decoded. Tap on Enable Centering again to turn off this
function and cancel the tick.
Enable Color Reverse: When this feature is enabled, the scanner can
recognizethe non-standard white barcode, but can’t recognize the
standard black barcode. Tap onEnable Color Reverse to turn off this
feature and cancel the tick.
Decode Mode: You can chooseone of two kinds of decode modes, either
Standard omni or Quick omni.
The standard scan mode includes all barcode types, with omnidirectional
function (i.g. 180
°
upside down), which also has the longest scan time.
This scan mode is set by default in this application.
