18
4.
Once this is complete disable the BACnet setup by moving the dip switch position 1 to
off (left) position.
5.
Press Save and Exit.
6.
After the unit returns to the main menu screen, disconnect the power to the unit and
reconnect in order to boot-up with the proper MAC address and Device Instance. The
power can also be cycled by removing Jumper JP1 and then reconnecting.
The unit can also be configured through the BACnet interface as well as through the
touch screen user interface.
Room Auto Discover Results
- Used to review Auto Discover results and modify the
room screen location on the Home Screen.
Note:
After cycling the power, only the rooms selected to be monitor will be listed in the
Room Auto Discover Results screen.
Five position dip
sw itch location
Removing the jumper
causes power loss.
Re-insert the jumper
to restore pow er.
