background image

6.0 Limited warranty & limitation of repair

SETRA warrants its products to be free from defects in materials and workmanship, subject 

to the following terms and conditions:  Without charge, SETRA will repair or replace products 

found to be defective in materials or workmanship within the warranty period; provided that:

a) the product has not been subjected to abuse, neglect, accident, incorrect wiring 

not our own, improper installation or servicing , or use in violation of instructions 

furnished by SETRA;

b) the product has not been repaired or altered by anyone except SETRA or its 

authorized service agencies;

c) the serial number or date code has not been removed, defaced, or otherwise 

changed; and

d) examination discloses, in the judgment of SETRA, the defect in materials or 

workmanship developed under normal installation, use and service; 

e) SETRA is notified in advance of and the product is returned to SETRA transportation 

prepaid.

Unless otherwise specified in a manual or warranty card, or agreed to in a writing signed by 

a SETRA officer, SETRA pressure and acceleration products shall be warranted for one year 

from date of sale.

The foregoing warranty is in lieu of all warranties, express, implied or statutory, including but 

not limited to, any implied warranty of merchantability for a particular purpose.

SETRA’s liability for breach of warranty is limited to repair or replacement, or if the goods cannot 

be repaired or replaced, to a refund of the purchase price.

SETRA’s liability for all other breaches is limited to a refund of the purchase price.  In no instance 

shall SETRA be liable for incidental or consequential damages arising from a breach of warranty, 

or from the use or installation of its products.

No representative or person is authorized to give any warranty other than as set out above or 

to assume for SETRA any other liability in connection with the sale of its products. 

Summary of Contents for 206









Reviews: