Hello and welcome to the Buss-It! system! These modules are designed to passively route four signals to
any of the other modules connected via the rear 6-pin IDC headers and cable, providing "taps" throughout
a Eurorack system for quick and easy access to important signals such as gates, sequences, envelopes,
etc.
A single Buss-it! Tile. Note the parallel in/out headers with Ground indicated on the bottom pins.
The Buss-It! is a fully passive system and does not contain any signal conditioning or protection. As such,
it can't be used to mix signals together, and normal precautions involving not connecting outputs to
outputs apply here.
Once a signal is input to one of the Buss-It!'s four channels, all other instances
of that channel MUST be treated as outputs or you risk damage to your modules.
