21
ENGLISH
Running time
There are six brightness levels: 8%, 25%, 50%, 75%, 100% and 125%. These are mainly used to allow longer battery
life when this option is needed. In the following you will find the (approximate) running times:
The 125% setting gives a 10-minute boost of light and will then drop back to 100% automatically.
Specific run times can be programmed in at manufacture, please contact SETOLITE Lichttechnik for more infor-
mation.
Whichever SETO POWER LED battery charger you have selected to recharge your SETO POWER LED, it was desi-
gned to be left connected indefinitely to the battery unit so your lighting product is always topped up and ready
for use. Your SETO POWER LED can be charged and run at the same time, this may be useful when using the light
as an emergency back up should the mains power fail.
It is good practice to always put your SETO POWER LED light back on charge even when used for a short
period of time, leaving the unit partially or fully discharged will have an adverse effect on the longevity of
the battery life / performance.
All the chargers supplied show a combination of lights to indicate each stage of the charging process. For more
details on charging please see the separate instructions included with the charger.
Note always charge your SETO POWER LED in a dry, well ventilated environment.
CHARGING THE SETO POWER LED
Plug charger into spare
socket on rear of unit
Brightness
Duration
8%
approx. 5 days
25%
approx. 33 hours
50%
approx. 16 hours
75%
approx. 11 hours
100% (Default Mode on switch-on)
approx. 8 hours
125% (Boost Mode)
See below*
*
