Version 13.03.2015
Page
10
3.6.
Coding and decoding of rear-‐view camera (only Porsche Cayenne with PCM3)
The rear-‐view camera coding and decoding can be done by loose white cable in connection
with dip 3 of CAN-‐box RLC-‐TV521.
1. Turn on ignition
2. Wait until the head-‐unit has booted
3. Set dip 3 of CAN-‐box (depending on the desired coding/decoding)
4. Put +12V for 5 sec. to the white cable
5. During configuration the red and blue LED are blinking short inside the CAN-‐box
(visible at the male 8pin Molex connector). The PCM
makes a reset after 5-‐10 sec.
6. The red and the blue LED inside the CAN-‐Box are
glowing and the menu „Rear-‐view camera“ appears in
the menu OPTION after a successful coding (or
disappears after successful decoding)
Note:
After a coding or decoding another coding isn’t possible within the next 60 seconds!
4. Activation of the video-‐in-‐motion function
With dip1 to ON the video-‐in-‐motion function is activated permanently without disturbing
the navigation performance.
Dip
Function
ON
OFF
Dip 3
Rear-‐view camera Coding Decoding
