Setec Power DC Quick EV Charger, Installation Manual, Page: 13 / 24

13
Operation
①
Front door open
-Press button under handle and turn handle clockwise in the following order,
then Front door will open.
②
Switch ON main circuit breaker
-Check whether the status LED for AC power is ON.
-Check module status.
-Check screen for card authentication.
③
Closing door
If the above process is completed, make sure to close door before charging for
safety.
Charging Process Details
Select the charging connector
The screen interface shows EV charger is idle status,insert the charging
connector to vehicle’s charging port accordingly and fixedly. Select the
After beep sound, vehicle start to charge with starting sound