Run Mode
PV
SV
A.on
B.int
C.on
D.int
Key Setting Value
Key Setting Value
Key Setting Value
Key Setting Value
Key Setting Value
One Shot Mode
A.Out
C.Out
A.On
B.int
C.On
D.int
UP 0
Power
Start
Gate
Stop
Output charts
Power
Start
A.Out
C.Out
A
B
C
D
A.Out
C.Out
A.On
B.int
C.On
D.int
UP 0
Power
Start
Gate
Stop
Cycle Mode
Output charts
A
B
C
Power
Start
A.Out
C.Out
D A
1.Chang the run mode to setting mode the operation is continuous.
2.Return to the run mode and automatic reset when change the
function setting .
3.When press
or
key, turn to the set value mode, setting digital
will blink. Press or push the key for change the value. If no any change,
return to the run mode after 30 second, and the setting is saved same time
automatic reset.
Operation Charts
Dimensions with Flush Mounting Adapter
Dimensions
Panel Cutouts
Flush Mounting Adapter
Min.63
Min.60
All units are in millimeters unless otherwise indicated.
Flush mounting adapter: YX-Y1 (Provided)
Terminal Arrangement
10
6
7
8
9
1
11
12
2
3
4
5
A
C
Precautions
Separate the input signal cables from the power line.
Short connecting wire from the sensor to the product is the best, if not please using shield cable.
Use and store the product within the ratings specified for temperature and humidity
The period of power off to on must be over 1 s
Specifications and design subject to modifications without notice
SESTOS (H.K.) ELECTRONICS CO.
http://www.sestos-hk.com E-mail:[email protected]
