background image

U S E R    
GUIDE 

SAFETY PRECAUTIONS 

1.  To prevent fire or shock hazard, do not expose this equipment to high humidity and/or dust. Do not use in an  

unprotected outdoor installation nor any area classified as overly damp or wet. 

2.  The temperature for installation should be kept between 32°F to 140°F (0°C to 60°C). Avoid direct sunlight  

exposure or extreme changes of temperature over a short period of time. 

3.  Do not disassemble the unit as this voids the warranty. 

4.  Do not drop the unit and avoid heavy impact. 

5.  This unit should not be permanently installed unless proper ventilation is provided. Any enclosure openings must not 

be blocked or covered as they protect the unit from overheating. 

6.  Before cleaning, turn off the power and unplug the unit from all connections. Use a damp cloth. Do not use  

liquid or aerosol cleaners. 

7.  Do not overload outlets and extension cords as this may result in a risk of fire or electric shock. 

8.  Enclosure entry is dangerous. Never push objects of any kind, including liquids, into this unit through openings as 

they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. 

9.  Do not attempt to open or service this unit yourself as opening or removing covers may expose you to dangerous volt-

age and other hazards. 

10.

 

There are no user-serviceable parts inside the unit. If the unit requires service contact your authorized dealer,  
or an authorized repair service company.

 

SESCOM 

PO Box 720 • Mt. Marion, NY 12456 • USA 

845.246.1915 • [email protected]

 

Federal Communications Commission (FCC) Compliance Notices 

Class A Interference Statement 

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated  
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this  
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the  
interference at his own expense. 

 

FCC Caution 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause 
harmful interference, and (2) this device must accept any interference received, including interference that may cause  
undesired operation. 

Reviews: