9
SERVOGLAS 6OOO
5. Storage and Temperature Range
Your Servore welding helmet is strong and durable. It is designed to work in temperatures between -5C
and +55C. Do not use your helmet in very hot conditions where temperatures 65C. Always store
your helmet in a clean dry place out of the direct sun and protect it from exposure to moisture or extreme
heat (min/max storage temperature is -20C ~ +70C).
Avoid unnecessary impact or compression of your helmet and never use a helmet that is damaged. Your
Servore welding helmet is a quality professional tool and careful storage will extend the life of your
investment.
6. Inspection
Check your helmet shell and filter on a regular basis when in normal use and after extended periods of
storage. Never use a cracked or damaged helmet as this may result in personal injury and will void your
warranty.
Please replace any worn or damaged parts as necessary.
Genuine ServoGlas
Ⓡ
replacement parts are available from your authorized ServoGlas
Ⓡ
distributor.
7. Cleaning
After removing the welding filter from the shell the shell can be cleaned using a mild detergent and water
solution. Sweat bands can be washed. A silicone based lubricant may be used on moving parts if necessary
but is not normally required. The filter may be carefully wiped with a cloth dampened with household
window cleaning solution. Please be careful not to scratch or otherwise damage the filter cartridge with
fragments of welding spatter or other abrasive dirt. Refer to the relevant parts diagram for illustrations
regarding assembly and disassembly.
Never expose the filter cartridge to direct contact with water or solvents.
Note
우노다시다시 2013.01.15 04:10 PM 페이지9 왼쪽 PDF_MONO 2400DPI 175LPI T
