SerVision MVG200, Configuration And Management Manual, Page: 216 / 241

SerVision Embedded Video Gateway System Guide
Appendix A: Viewing Video on a CCTV Monitor (TV-Out) 215
Figure 254: Event-Time Selection screen
3. Select the down or up arrows of the scroll bar to display additional event times, if necessary.
Note: Selecting the scroll bar itself does not scroll the list; only the arrows at the top and bottom of the scroll
bar can be used to scroll.
Note: To close the screen and return to live video display, select Done or select the button above the menu.
4. Select a time. The
Playback
screen opens, and the video is played, beginning with the specified start date and
time, in the size you specified in the
Playback
menu. Playback controls appear in the upper left of the screen.
See The Playback Screen below for information about the
Playback
screen.
The Playback Screen
The
Playback
screen contains a camera pane in which the selected video is played, as well as playback and
navigation controls. If the display options call for a timestamp and/or the camera name, they are superimposed on
the camera pane. For information about setting these options, see
Configuring a CCTV Monitor (TV-Out) , page 25;
Adjusting On-Screen Information Display , page 230.