LS24I/M
37
LS24I/M User guide
Copyright ServerNet S.r.l. 2015-2016, All Rights Reserved
6.4.
Battery charging
By design LS24I/M works along with other devices, LS24I
be turned on when it has USB B (on power transition) or
source active.
LS24I/M internal battery is intended only as temporary power backup to
support device in case of temporary power source failure
inadequate or insufficient external power level.
By design, the LS24I/M is maintaining the battery fully
cannot be changed by any option including powering of the device.
For LS24I/M battery charging status, refer to battery charging orange LED
on the front panel.
If battery charging LED is ON, device is charging its battery; if it is OFF,
device is not charging its battery. No assumption about the battery level
should be made by the user without accessing LS24I/M web interface.
See the previous chapter 1.6.1 “LED indicators” for more details on
charging LED information.
IMPORTANT
If your device was inactive or configured and never used for a long
time (3 months or more) or its internal battery is completely
discharged, you need to restore battery charge condition
following steps:
•
Put the device in charge using a wall power adapter.
•
Since device switches on automatically if powered, you must
press and hold the ON/OFF button in order to force device
switch off.
•
Wait until the battery LED switches off (battery fully charged).
You can now use your device: this procedure will avoid the
problems that might occur with internal battery completely
discharged condition.
Apr, 2016
with other devices, LS24I/M is designed to
or 7-30V DC power
LS24I/M internal battery is intended only as temporary power backup to
device in case of temporary power source failure or temporary
charged and this
cannot be changed by any option including powering of the device.
r to battery charging orange LED
is ON, device is charging its battery; if it is OFF,
device is not charging its battery. No assumption about the battery level
should be made by the user without accessing LS24I/M web interface.
indicators” for more details on battery
your device was inactive or configured and never used for a long
battery is completely
you need to restore battery charge condition with the
ut the device in charge using a wall power adapter.
omatically if powered, you must
press and hold the ON/OFF button in order to force device
switches off (battery fully charged).
You can now use your device: this procedure will avoid the
th internal battery completely
