LS24I/M
21
LS24I/M User guide
Copyright ServerNet S.r.l. 2015-2016, All Rights Reserved
1.6.
Controls and Indicators
LS24I/M is designed to be ON and running when connected to an external
power source. That’s why connecting the device to a USB power source
plugging the USB A to B power cable connectors, or plu
cable into the 7-30V DC power connector, the device wakes
immediately, loads the OS and the Configurations previously loaded
For more details about power supply management you can
following chapter 5.
1.6.1.
LED Indicators
IMPORTANT.
The following table represents indicator meanings for device
hardware is OFF or when is running with only the OS installed
third part Configuration loaded.
When a third part Configuration is loaded on the LS24I/M,
OS to set all the parameters required to implement
functionalities. In this case, COM LED indicator meanings can be
completely mapped by the third part Configuration.
Refer to third part Configuration specific documentation from the
Configuration Distributor to know COM indicator mapped
running mode.
Indicator
Device
status
Action
Related LED
color
Both LS24I and LS24M
Battery charging
LED
ON/OFF Battery charging
process running
Steady
orange
Battery charging
LED
ON/OFF Battery failure
Flashing
orange
Battery charging
LED
ON/OFF Battery fully charged
off
Status LED
ON
Power mode check,
device start up and OS
loading
Flashing
Orange
Apr, 2016
LS24I/M is designed to be ON and running when connected to an external
connecting the device to a USB power source
, or plugging the power
V DC power connector, the device wakes up
, loads the OS and the Configurations previously loaded.
you can see the
meanings for device LED when
installed without any
, it is used by the
implement specific device
indicator meanings can be
specific documentation from the
ped on hardware
Meaning
Battery in charge
Battery failure:
call internal
support
Battery fully
charged
Device wake-up
process and OS
loading
