Page 8
Manual 01659-RevB 010919
SNAP!
NEED HELP?
Please refer to page 2 for descriptions
of pump components.
Examine your pump parts. Certain components
may be marked with individual part numbers.
262.628.5600 | 800.558.8722
Server Products Inc.
3601 Pleasant Hill Road
Richfield, WI 53076 USA
SERVER PRODUCTS
LIMITED WARRANTY
GENERAL SERVICE,
REPAIR OR RETURNS
Server Products equipment is backed by a
two-year limited warranty against defects in
materials and workmanship.
For complete warranty information go to:
www.Server-Products.com
Before sending any item to Server Products
for service, repair, or return, contact Server
Products customer service to request a
Return
Authorization Number.
Merchandise must be
sent to Server Products with this number. Service
is extremely prompt. Typically, units are repaired
and ship out within 48 hours of receipt.
Merchandise being returned for credit must be in
new and unused condition and not more than 90
days old and will be subject to a 20% restocking
charge.
TROUBLESHOOTING
INCONSISTENT PORTIONS?
PRODUCT OOZES OUT FROM LOCKING COLLAR?
• Ensure product container is not empty
and
has
enough product
to pump.
• Ensure that the
cap is securely snapped
into place below all the threading on
the
cylinder.
•
Clean pump.
• Ensure unit is
assembled correctly.
TIP:
Flared end of
seal
must face down.
• Ensure
pinch valve
is installed correctly.
TIP:
Squeeze the pinch valve
open before installation to
ensure it isn’t stuck shut.
• Ensure that the
spring
is functional.
Replace broken spring if necessary.
• Ensure that the
stainless steel ball
is snapped in place below tabs.
