Page 6
SETUP
PRACTICE SAFETY.
WASH ALL PARTS PROPERLY BEFORE USE.
See page 9.
POUR PRODUCT & INSTALL JAR/LID INTO SHROUD
1
Fill jar to 1/2-inch below the handle of jar
to allow for displacement of product when
pump is inserted. Do NOT pour directly into
dispenser shroud. Place lid on jar.
For countertop unit (100236), remove back
slide panel and slide lid and jar through the
back of the shroud. Replace the back slide
panel.
For the drop-in unit (100237), pick up lid and
jar and carefully place in the shroud from
the top.
Align pump guides into slots in shroud and guide pick-up tube of the pump through
the access hole in the lid and into the food product. Prior to putting lid on, prime
the pump with your hand(s) by pressing the dome and releasing until food product
fills the discharge tube.
INSTALL PUMP & PRIME
2
Shroud
Lid
Pump being primed by
hand by pressing the
dome and releasing
until food product fills
the discharge tube.
Pump primed with
food product seen in
discharge tube.
Jar
Fill Point
Back Slide Panel
Slide Lid & Jar
Through the
Back of the
Shroud
Jar and Lid Being
Placed Into the Shroud
from the Top
