Server Products Inc.
3601 Pleasant Hill Road
Richfield, WI 53076 USA
262.628.5600
800.558.8722
262.628.5110
www.server-products.com
GENERAL SERVICE, REPAIR,
OR RETURNS
Before sending any item to Server Products for service,
repair, or return, contact Server Products customer
service to request a
Return Authorization Number.
Merchandise must be sent to Server Products with this
number.
Merchandise being returned for credit must be in new
and unused condition and not more than 90 days old
and will be subject to a 20% (percent) restocking
charge. Electrical parts (thermostats, heating elements
etc.) are not returnable.
Server Products maintains a fully staffed service depart-
ment with highly skilled factory trained personnel.
Service is extremely prompt. Under normal circum-
stances, a repaired unit is shipped out the day after it is
received. Labor charges are reasonable.
SERVICE
Contact your dealer or Server Products Inc.
customer service department for the following:
ORDERING REPLACEMENT PARTS
Be prepared to give this information:
•
Model Letters/Name/Numbers
•
Part Numbers- P/N
•
Series Numbers/Letters
•
Part Description
This information and other important data is stamped
on the lid or cylinder of pumps or on the bottom or
back side of every unit.
SERVER PRODUCTS
LIMITED WARRANTY
All Server Products equipment is backed by a
two-year limited warranty against defects in materials
and workmanship. For complete warranty information
go to:
www.server-products.com
UNIT CLEANING
BEFORE FIRST USE AND AFTER USE DAILY,
DISASSEMBLE AND CLEAN UNIT. STAINLESS STEEL
PARTS CAN CORRODE. IT IS IMPORTANT TO CLEAN,
RINSE, SANITIZE, AND DRY THESE PARTS DAILY AND
PROPERLY. FAILURE TO COMPLY WITH ANY OF THESE
INSTRUCTIONS MAY VOID UNIT WARRANTY.
1
SEE UNIT TAKE DOWN.
2
WASH ALL PARTS WITH DISHWASHING DETERGENT
AND HOT WATER DAILY. RINSE THOROUGHLY AND
DRY WITH A CLEAN SOFT CLOTH.
•
A general purpose, nonabrasive cleaner may be
used on hard to remove food deposits.
•
You may use a mildly abrasive NYLON or brass
brush to remove any stubborn food or mineral
deposits on interior surfaces of unit.
•
Do not use abrasive cleansers, scrapers, steel
pads, steel wool, or other cleaning tools that can
scratch surfaces.
•
Do not use cleansing agents with high
concentrations of acid, alkaline or chlorine.
These agents can corrode stainless steel.
•
Fully rinsing all parts can help prevent corrosion.
•
Various elements and minerals, such as chlorides
in tap water, can accumulate on stainless steel
parts and create corrosion.
•
To prevent corrosion on any stainless steel parts,
it is important to fully dry with a clean soft cloth
regularly.
3
WIPE EXTERNAL SURFACES OF UNIT DAILY WITH
A CLEAN DAMP CLOTH. DRY WITH A CLEAN SOFT
CLOTH.
•
A nontoxic glass cleaner may be used for cleaning
any stainless steel parts and lid.
4
SANITIZE ALL PARTS FOLLOWING YOUR LOCAL
SANITIZATION REQUIREMENTS. ALL PARTS IN
CONTACT WITH FOOD MUST BE SANITIZED.
•
Allow parts to fully air dry after sanitization.
