- 6 -
- 7 -
Initial Steps
A. Shocks:
Attach front and rear shocks.
B. Wheels:
Mount all four wheels on the car.
Setup Apparatus
Measure track-width with the car resting on a
flat measuring surface, such as the HUDY Flat
Setup Board which has graduated markings to
measure track-width.
A3.1 MEASURING TRACK-WIDTH
Measure front track-width on the outside edges of the front wheels.
Measure rear track-width on the outside edges of the rear wheels.
A3.2 SETTING FRONT TRACK-WIDTH
Front Track-width Default Setting =
199mm
Set the front track-width to
199mm
.
(The outer edge of each front wheel should be
99.5mm from the centerline of the chassis.)
Adjust front track-width using the pivotballs in
the front steering blocks:
• To
increase
front track-width,
turn OUT
both upper and lower pivotballs equally.
• To
decrease
front track-width,
turn IN
both upper and lower pivotballs
equally.
IMPORTANT!
Make equal adjustments on both left and right sides. Track-width must be
symmetrical on both left and right sides of the car.
Changing front track-width will also affect the front toe setting.
A3.3 SETTING REAR TRACK-WIDTH
Rear Track-width Default Setting =
200mm
Set the rear track-width to 200mm.
(The outer edge of each rear wheel should be
100mm from the centerline of the chassis.)
Adjust rear track-width with the two lower
pivotballs in the rear uprights, and also the
rear upper camber link.
• To
increase
rear track-width,
turn OUT
both pivotballs equally, and lengthen the camber link.
• To
decrease
rear track-width,
turn IN
both pivotballs equally, and
shorten the camber link.
IMPORTANT!
Make equal adjustments on both left and right sides. Track-width must be
symmetrical on both left and right sides of the car.