- 10 -
- 11 -
IMPORTANT!
Make equal adjustments on both left and right sides of the car.
A7.1 MEASURING
TOE
Measure front and rear
toe using the setup
system according
to the instructions
provided with the
setup system.
A7.2 SETTING FRONT TOE
Front Toe Default Setting = -1.0° (toe-
out)
Adjust the front toe-out value of each front
wheel to
-1.0°
(fronts of front wheels
pointing outward) by adjusting the lengths of
the front steering rods.
• To set
less toe-out
,
LENGTHEN
each
steering rod equally.
• To set
more toe-out
,
SHORTEN
each
steering rod equally.
A7.3 SETTING REAR TOE
Rear Toe Default Setting = +3.0° (toe-in)
Adjust the rear toe-in value of each rear
wheel to
+3.0°
(fronts of rear wheels
pointing inward) by adjusting the two (2)
lower pivotballs in the rear uprights in equal
but opposite directions.
• To set
more
rear toe-in,
turn IN
the
front lower pivotball, and
turn OUT
the
rear lower pivotball.
• To set
less
rear toe-in,
turn OUT
the
front lower pivotball, and
turn IN
the
rear lower pivotball.
IMPORTANT!
Ensure you adjust the rear lower pivotballs in equal but opposite directions,
or you will change the camber setting.