Serpent Cobra SRX8 GTE, Instruction Manual

Page: 8 / 40

10.1
INDRIVE BRACKETS CHART
LOW
MID
HIGH
HIGH
MID
LOW
Assemble the indrive bracket accordingly to the diff insert assert
mouted in the step 18.
After building the differential with
new gears, new differential case and
bearings, the diff may feel a little tight.
The connected parts need at least an hour
run-time to create a perfect match. Attention:
When you assemble the diff with too much
initial play, the gears will not run-in properly
and may wear quickly. After 1 or 2 hours of
running the car, re-check the gear-mesh
between the ring gear and the pinion. All parts
should have run-in properly now. You may add
or remove 8x11x0.1 shims as needed.
STEP 9 STEP 10
8
BAG 2
M4x12
M4x12
8x16x5
8x16x5
5x13x4
5x13x4
M5x4
M5x4
M3x20
M3x20
M3x10
M3x10
8x11x0.2
8x11x0.2
10.2