- 24 -
- 25 -
STEP 6.6
STEP 6.7
M14
5x10x0.1mm
5x10x0.3mm
Install only the clutchbell and the thrustbearing assembly on the engine crankshaft. Push the
clutchbell onto the clutch shoe, and then measure the distance A as indicated.
Pull the clutchbell away from the clutch shoe, and then measure the distance B as indicated.
The clutch gap is A – B; the correct gap is 0.7mm.
If the clutch gap is greater than 0.7mm, you can easily calculate the thickness of shims
required to set the correct gap:
Thickness of shims required (in mm) = A – B – 0.7
For example, using the values A=1.3mm, B=0.3mm
Shim thickness = 1.3 – 0.3 – 0.7 = 0.3mm
Place shims between the outer thrustbearing plate and the rim of the thrustbearing carrier as
shown.
Thrustbearing
Thrustbearing carrier
Place shims here
Place small shims to remove all
but a small amount of end play
ADJUSTING THE END PLAY
U4
5x10mm
U45
5x13mm
ADJUSTING THE CLUTCH GAP
1
2
3
4
Pull
Push
M14
U45
U4
A
B
Learn about clutch
shoe gap
Learn about clutch
end play
All manuals and user guides at all-guides.com
