RELEASE
Revision B1
©Serious Integrated, Inc.
16
ENVIRONMENTAL CHARACTERISTICS
Specification
Variant
Permissible Range
Min
Typ
Max
Units
Operating Temperature
All
-20
+70
C
Storage Temperature
All
-30
+80
C
Humidity
All
90%
(@60C)
RH
HANDLING AND CARE
Observe the following handling and care guidelines.
HANDLING
Be very careful when handling the edge of the SIM where the flexible cable from the LCD panel
is exposed. This can be easily damaged or ripped if shear-force is applied in handling.
Do not attempt to disassemble the module or solder components or wires to the module; this
may render your board non-functional and void your warranty.
As with all electronic subsystems and circuits, observe proper ESD handling procedures.
As with any glass product, use reasonable care when handling to avoid glass chips and cracks.
If the LCD glass breaks and the LCD liquid materials escape, avoid contact with bare skin. Wash
exposed skin with soap and water immediately and dispose of the product according to local
materials handling procedures.
If the SIM comes in factory packaging with a protective cover sheet on the LCD, it is advised to
leave this protective film in place until the SIM is mounted in the final assembly to prevent
scratches and fingerprints from marring the display surface. Do not expose to high
temperature and/or high humidity testing with the protective sheet place. Slowly remove the
protective sheet to minimize potential static electricity creation.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
