SLK-S502 Serial server instruction manual
WEB
：
：
18
2.4.5 UDP Client
Protocol select UDP, Local host addr select the IP address set by the computer, which is in the same
network segment as the device's LAN port IP. The Local host port is the default, and the client settings
need to use Local host addr and Local host port,click Open.
Select Serisl Utility>>>PORT2 in turn,choose UDP Client as the network protocol, and choose the
data type according to your needs. Generally, the choice is Raw date. You need to remember the local
port after setting. The IP address and port number of the serial port server are used when establishing a
UDP connection. Compared with UDP Server, UDP Client has an additional server IP address and server
port number. The purpose of this addition is to ensure the security of UDP data transmission. Network
data only receives data from the server IP and server port number. The rest of the data are denied access.
Configure the baud rate, data bit, stop bit and parity bit of the serial port through the serial port
configuration bar according to your needs. After the configuration is complete, click SAVA & APPLY.
In the next step, the following information needs to be filled in the software.
