SLK-S502 Serial server instruction manual
WEB
：
：
13
2.4.3 TCP Client
Protocol select TCP Server, Local host addr select the IP address set by the computer, which is in the same
network segment as the device's LAN port IP. The Local host port is the default, and the client settings need to use
Local host addr and Local host port,click Open.
Select Serisl Utility>>>PORT2 in turn,select TCP Client as the network protocol, and the server IP
and port number should be consistent with the software settings. Configure the baud rate, data bit, stop
bit and parity bit of the serial port according to your needs through the serial port configuration bar. After
the configuration is complete, click SAVA & APPLY.
