WiSnap User Manual 2.21 04112011-JF
Page
25
of
66
6
GET Commands
These commands begin with “get”. They display the current values.
get ad-hoc
display all ad-hoc settings.
get broadcast
will display the broadcast UPD address, port and interval
get everything
displays all configuration settings, useful for debug.
get com
display comm. settings.
get dns
display DNS settings.
get ftp
display FTP settings.
get ip
<
a
>
display IP address and port number settings. If the “a” parameter is added on,
only the current IP address value will be shown.
get mac
display the device MAC address
.
get optional
display the optional settings like device ID
.
get q
display the sensor settings (sensor mask and sensor power settings).
get sys
display system settings, sleep, wake timers, etc.
get time
display the time server UDP address and port number.
get wlan
display the SSID, channel, and other WLAN settings.
get UART
display the UART settings.
ver
return the software release version.
