Serial Cables PCI-AD-x16HE-BG4, User Manual

Page: 9 / 18

9
CLI Setup
Step 1. Install and launch Tera Term applica,on
(or Hyper Terminal requires version 3.0 or higher).
Step 2: To ensure proper communica,ons between Atlas host adapter card controller
and the VT100 Terminal emula,on, please configure the VT100 Terminal
emula,on seMngs to the values shown below:
Step 3:
For “Port”, select COM3 in this example. (Depend on which COM port used on Host)
For “Baud rate”, select 115200.
For “Data”, select 8 bit. For “Parity”, select none.
For “Stop”, select 1 bit. For “Flow control”, select: none.
Click OK when you have finished your selec,ons.
Atlas External Host Adapter Card