www.SereneLifeHome.com
7
MONITOR ASSEMBLY INSTRUCTIONS
•
Insert batteries into the back of the
monitor as instructed in the battery
well of the monitor. Make sure that the
batteries are inserted the correct way
round for it to work. Slide the monitor
onto the metal bar of the frame in the
middle of the handlebar.
•
Connect the plugs from the handlebar
into the back of the monitor
(1 for sensor, 1 x for pulse).
MONITOR BUTTONS
MODE:
This key lets you select the
following functions; Scan, Time, Speed,
Distance, Calorie & Pulse.
SET:
Press Set to give your workout a
goal, for example if you wish to work
out for 5 minutes. Make sure display is
on Timer function (by pressing Mode),
press Set so display is flashing and the
Timer will start to increase. Stop pressing
once target is reached. Hold down
button to cycle through quicker.
You can give yourself a target in Time,
Distance, Calories or Pulse rate.
RESET:
This will clear the display to
show zero. Press and hold for 3 seconds
to restart the monitor.
Summary of Contents for SLXB18
Page 15: ...www SereneLifeHome com 15...
Page 16: ......
