background image

www.SereneLifeHome.com

3

• 

Soaking in hot water during pregnancy can cause damage to the unborn foetus. 

   If you have any specific concerns please consult your doctor before continuing to  
   use your hot tub.

• 

Use of alcohol, drugs or medication before or during use of your 

Inflatable Pool Spa

  

   can increase risk of drowning.

• 

Those with history of heart disease, low/high blood pressure, circulatory system   

   problems or diabetes should consult a doctor before using 

Inflatable Pool Spa

.  

   People using medication should consult their doctor before using the Spa. 
   Some medications may cause drowsiness, whilst other medication may affect heart  
   rate, blood pressure and circulation during use.

• 

Water in a 

Inflatable Pool Spa

 should never exceed 42°C (107°F). 

   Operating temperatures between 38-40°C (100-104°F) are considered safe for a   
   healthy adult. Lower temperatures are recommended for younger children, and   
   when use exceeds 10 continuous minutes.

• 

A max temperature of 42°C can be programmed for the water - Once cover is removed,  

   water temperature will automatically drop as heat is released through evaporation.  
   The additional 2°C compensates for heat loss that may occur. Once you are ready to  
   use, reduce maximum temperature to recommended 38-40°C (100-104°F) and    
   ensure that temperature reading is no greater than 40°C.

• 

Immediately get out of your 

Inflatable Pool Spa

 if you feel uncomfortable or sleepy.

• 

Do not turn 

Inflatable Pool Spa

 on when it is empty. This could cause irreparable  

   damage to pump system which would nullify any warranty period.

• 

To avoid damaging your pump & heating system during colder weather, your    

   

Inflatable Pool Spa

 is fitted with 365 FreezeGuard Technology. Set the temperature  

   to 5°C, and this will prevent any water in the system from freezing.

• 

Always add chemicals to jug of water to avoid strong fumes or violent reactions   

   that may result in a hazardous chemical spray.

• 

To avoid accidental resetting of thermal cut-out, this appliance must not be supplied  

   through an external switching device, such as a timer, or connected to a circuit that  
   is regularly switched on and off by the utility.

• 

WARNING: 

Adequate drainage has to be provided to deal with overflow of water.

• 

IMPORTANT:

 For set-up/installation, the surface must be smooth, flat, level and   

   capable of evenly supporting the weight of the 

Inflatable Pool Spa

, water and users  

   e.g. 6 Person Square 

Inflatable Pool Spa

 filled weight: 980kg (approx) plus combined  

   weight of occupants. It is the responsibility of the Spa owner to assure integrity of  
   the site at all times.

WARNING - PLEASE READ CAREFULLY!

Do not operate pump and heating system whilst the Pool Spa is empty.

This can damage the system and void your warranty.

Summary of Contents for SLSPA4RND

















Reviews: