www.SereneLifeHome.com
11
CLEANING YOUR INFLATABLE POOL SPA
Detergent residues, dissolved solids from bathing suits and chemicals will gradually
accumulate in the water. To clean your
Inflatable Pool Spa
, use soap and water then
rinse thoroughly.
Please note:
DO NOT
use hard brushes or abrasive cleaners.
REPAIRING PUNCTURES IN YOUR INFLATABLE POOL SPA
If your
Inflatable Pool Spa
is torn/punctured, use repair patches. Completely dry area
to be repaired, apply strong adhesive to repair patch and then cover the damaged area.
Smooth the surface to remove any air bubbles. Leave to dry for 12 hours before using
the
Inflatable Pool Spa
.
CLEANING & STORING AWAY YOUR INFLATABLE POOL SPA
HOW TO EMPTY YOUR INFLATABLE POOL SPA
1. Firstly, remove the
Inflatable Pool Spa
plug from the electrical mains.
2. Remove the screw cap from the water outlet (L) (below the pump system of the
Inflatable Pool Spa
) ensuring the Drainage Plug (G) is still inserted to prevent
unexpected draining.
3. Screw the inflation hose (D) onto the water outlet (L) and direct the open end of
the hose appropriately.
4. Remove the drainage plug from the outlet within the floor of the
Inflatable Pool
Spa
, so the water can flow out.
5. Once drained use a sponge to absorb excess water; then operate air jet function
for up to 20 minutes (one full cycle) to drain any water and dry out the pipeline.
If not completely dry after first cycle – repeat.
6. When draining has finished, remove the inflation hose (D) and replace the drainage
plug (G) and water outlet cap (L).
HOW TO DEFLATE YOUR INFLATABLE POOL SPA
1. Locate the black two part air valve on the spa (see point 9) on ‘setting up your
Inflatable Pool Spa
’ item (K).
2. Fully unscrew and remove the rapid deflation air valve turning anti-clockwise (K).
3. Fold the spa away carefully to direct and remove as much air as possible through
the open valve.
