7. If TIME, DISTANCE, CALORIES, STROKES or any of these are setting
，
the corresponding value will be inverted in motion status
.
When any of setting
value count to 0, the motion will be STOP and “
DI DI
” Voice Prompt;
8. Press “
START/STOP
” key to STOP the motion, in the motion status;
RECOVERY MODE
In exercising status, first test your pulse as above mentioned. Then press “
RECEOVERY
”
key to enter pulse recovery function. The display will show 1 minute countdown as
well as your pulse rate. Hold on the pulse sensor until it counts down to zero. Then, it
will pop up your pulse recovery level from F1 to F6, that is, from the fastest recovery
to slowest. The fastest recovery F1 show the best;
Wireless BT & APP (Optional)
1. Turn on mobile Wireless BT and
APP, Click "
SEARCH
”;
2. Select a device, and click
“
Connecting
” to control you
monitor;
3. The monitor icon will be show
;
4. Press “
Start
” key to starting
motion, at this the monitor will
close the display;
5. Click “
STOP
”
,
to stop the motion;
Note:
Reconnect if a flashback
occurs after connecting, or restart
the monitor;
www.SereneLifeHome.com
21
F1=1.0
BEST STATE
1.0 < F2 <2.0
WELL
2.0 < F3 <2.9
GOOD
3.0 < F4 <3.9
ORDINARY
4.0 < F5 <5.9
Relatively poor
F6=6.0
BAD
