www.SereneLifeHome.com
2
www.SereneLifeHome.com
4
www.SereneLifeHome.com
5
PREPARATION
1. Prepare a cross head screw driver.
2. Read this instruction manual carefully before installation and use.
Keep this instruction manual in a proper and safe place for future use in case
needed.
PARTS DESCRIPTIONS:
PARTS DESCRIPTIONS:
ACCESSORIES PACK CHECK LIST:
INSTALLATION
1. The heater must be installed on at least 1.8M from the ground and 50cm from
the side wall.
2. Drill 2 holes on the ceiling or wall according to the size as table showed above.
Insert the 2 Expansion Bolts into the holes. Use a spanner to twist the Screw Nuts
on the Expansion Bolts clockwise till they are securely located in the holes.
Unscrew the Screw Nuts and put them aside with Washers, Spring Washers for
further use later.
3. Put Upper L Bracket onto the ceiling or wall. Let the 2 Expansion Bolts go
through the holes on Upper L Brackets and fix them with the Washers, Spring
Washers and Screw Nut above mentioned.
4. Put Lower L Bracket onto the rear side of the heater. Fix them with screws M6*8
using the provided allen key.
5. Mount Upper L Bracket on Lower L Bracket. Screw it tightly with Screw M6*16.
For wall-mounted installation, make sure the control box is on the left side.
6. Loose the Screw M6*16, set the heater to a desired angle and drive the Screws
M6*16 tight. The adjustable angle is within 60 degree totally.
No.
Part Name
No.
Part Name
1
Expansion Bolt M6*70
7
Lower L Bracket
2
Upper L Bracket
8
Main Switch
3
Washer
9
Control Panel
4
Spring Washer
10
Screw M6*8
5
Screw Nut M6
11
Allen Key
6
Screw M6*16
12
Remote Control
Accessory Name
Qty
Upper L Bracket
2
Lower L Bracket
2
Expansion Bolt M6*70
2
Screw M6*16
2
Remote Control
1
Allen Key
1
Screw M6*8
4
Fig. A
Fig. B
>700mm
396
>700mm
1
2
3, 4, 5
8
9
11
6
10
7
1 2
7
3, 4, 5 6 10
1900mm
