www.SereneLifeHome.com
5
Assembly
1. Insert telescopic rod (2) into the recess on the top of the motor unit (4).
2. Place the hanger (1) onto the telescopic rod (2). When you do this, make sure
that the slight bend in the hanger (1) points forward.
3.
Attach the nylon balloon:
• Pull it over the hanger (1). When you do this, make sure that the side with the
hole line points forward.
• Pull the small elastic cord at the top over the collar section on the hanger (1).
• Pull the large elastic cord at the bottom over the motor unit.
Use
NOTE!
• Always place the device with clear space above it and on all sides on a dry, flat,
solid and heat-resistant surface.
• It is essential that you follow the care labels for the textiles to be dried!
1.
Set the height you want. To do this, open the
clip underneath the hanger and pull out the
telescopic rod (2) and then close the clip.
2.
The nylon balloon should wrap around the
motor unit so that it can fully inflate
Summary of Contents for SLIRX45
Page 10: ......
